|
|
|
|
#16
01-22-2012, 11:55 AM
|
||||||
|
||||||
|
Quote:
Yes, but I use a one way check valve to prevent boost from getting to the modulator (only vacuum). Works good for me. Register now (free) or login to remove ads 
|
|
#17
01-22-2012, 03:28 PM
|
||||||
|
||||||
|
I posted somewhere else on the vac mod line. I have mine (T-350) directly into the manifold on it's own line. Hard line to the trans and soft line connections. I have not had any problems with it so far, 18k miles and I get 8 psi boost. The trans shifts very nice at all throttle positions. I do not use a kickdown.....I don't want the trans downshifting when I don't want it....like powering around the freeway interchanges.
I also have a checkvalve thing I got from Transgo but I just have not felt the need for this.
|
|
#18
01-22-2012, 06:16 PM
|
||||||
|
||||||
|
|
|
Back to top |
| Thread Tools | Search this Thread |
|
|
| Similar Threads for: "Blower Carb Boost Referenced power valves" | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Carb and power for a 454 | south65ss | Engine | 14 | 11-07-2007 08:12 AM |
| Carb selection help | SLR_65 | Engine | 2 | 09-03-2007 05:44 PM |
| Carb on an Eaton blower? | Richard Ellis | Engine | 2 | 01-26-2007 11:39 AM |
| Supercharger vs Turbocharger | bigjoedo | Engine | 31 | 11-17-2004 06:26 PM |
| Hydro Boost / Power Steering Plumbing | bg | Suspension - Brakes - Steering | 1 | 06-20-2003 12:47 PM |
