|
|
|
|
#1
01-26-2012, 07:54 PM
|
|||||
|
|||||
|
327 oil filler tube removal
I've got a 327 out of a 65 Chevelle that has a tall oil filler tube that I'd like to get rid of. I've got a PCV valve on the back side of the motor and both valve covers have vent caps. The motor has been built and is equipped with a high volume oil pump. First, how do I remove the tube and secondly will I encounter any motor issues if I plug the hole?
Register now (free) or login to remove ads 
|
|
#2
01-26-2012, 08:26 PM
|
||||||
|
||||||
|
The tubes are usually just pressed in, with a little "elbow grease" they can be extracted and plugged off with the proper size expansion/freeze plug. Take care not to allow any debris from falling into hole when removing tube. As long as you have a good working pcv system no harm will come.
|
|
|
Back to top |
| Thread Tools | Search this Thread |
|
|
| Similar Threads for: "327 oil filler tube removal" | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Filler tube relocation problem | hp246 | Hotrodding Basics | 1 | 04-15-2010 08:02 AM |
| Powerglide filler tube? | SECTION25 | Transmission - Rearend | 1 | 11-19-2008 08:11 AM |
| moving the gas filler tube | mickey1031 | Body - Exterior | 1 | 08-04-2006 08:06 PM |
| 283 Oil Filler Tube | DTL504 | Engine | 5 | 11-09-2003 05:57 PM |
| Filler tube leak | Deadtemple | Transmission - Rearend | 2 | 10-08-2003 06:39 AM |
