350 wont start

i have a 1994 chevy k1500 i replaced the passenger head gasket and put it all back together i have fuel and spark i pulled the number on plug and turned it over and have very little air comming out of the plug hole what does that mean


Register now (free) or login to remove ads

Sounds like the valves are adjusted to tight, not allowing them to close on the compression stroke. That would be my first thing to look at. Is it backfiring or belching through the carb?

__________________
''Life's tough, Pilgrim, and it's even tougher if you're stupid.''---John Wayne

Midnight Sun Street Rod Association

it did backfire for a few turns now it just turns over and i can also wiggle the rockers

Ayuh,... Did you Adjust them,..??

Too loose or to tight will lead to no compression. They need to be adjusted properly. There are many threads here on proper valve adjustment. Do a search.

__________________
Artificial Intelligence is no match for Natural Stupidity



Chet

thanks for the info guys it helped

Did you get it running?

__________________
Artificial Intelligence is no match for Natural Stupidity



Chet