|
|
|
|
#1
02-10-2012, 12:50 AM
|
||||
|
||||
|
12 bolt chev carrier swap
Hi I have a '66 chev impala with a 12 bolt rearend, 3.08 with welded spider gears, 200r4 trans. I want to swap it out for a higher ratio, Im thinking 3.55, or 3.73, mini spool. Just wanted to see if anyone has a done this before where a good place to buy the parts would be? Thanks.
Register now (free) or login to remove ads Last edited by grandslam1991 : 02-10-2012 at 12:52 AM. Reason: forgot to include info. 
|
|
#3
02-10-2012, 09:30 AM
|
||||||
|
||||||
|
You might look at randys ring and pinion.
|
|
#4
02-11-2012, 02:49 PM
|
||||||
|
||||||
|
Mini Spools aren't recommended for use on Pavement, just in case you don't know. If it's offroad dirt a Mini Spool is Ok. A Locker type Carrier or Power Trax locker for your Open Carrier may be a better idea. Either can be dangerous on wet pavement in a street car. A Clutch type Posi Carrier is better for street use.
|
|
#5
02-19-2012, 03:17 PM
|
||||
|
||||
|
I know they're arent for pavement, but it wouldnt be any different from welded spider pinions. Im just gonna change the ring+pinion and leave the spider/side gears as is.
|
|
|
Back to top |
| Thread Tools | Search this Thread |
|
|
| Similar Threads for: "12 bolt chev carrier swap" | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 1970 8.2 10 bolt BOP carrier swap | poy41 | Transmission - Rearend | 37 | 08-23-2009 07:55 PM |
| 10 bolt GM carrier swap | Popadopalis | Transmission - Rearend | 2 | 04-08-2008 11:53 AM |
| 12 bolt carrier in a 10 bolt housing | wagonman65 | Transmission - Rearend | 8 | 01-02-2008 02:54 PM |
| 10 bolt carrier swap | twisted91 | Transmission - Rearend | 3 | 03-14-2006 03:13 PM |
| 8.5 GM 10 BOLT CARRIER SWAP, POSSIBLE?? | PURPLEOMEGA | Transmission - Rearend | 0 | 09-18-2002 03:04 AM |
