Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Singer 211 issue, bobbin case?
View Single Post
  #24 (permalink)  
Old 05-11-2013, 12:45 PM
adamvaughn adamvaughn is offline
Registered User
 
Join Date: May 2013
Location: westland MI
Posts: 11
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Two Issues

First Issue: These first two pics show the thread stay on the top side of the bobbin and then gets a little snagged just before the stitch is tightened up.
https://www.dropbox.com/s/po1v6xru3v...%2030%20PM.jpg
https://www.dropbox.com/s/ro5ht5881d...%2052%20PM.jpg
(you can see my screwdriver pointing where is snags....just a little.)

Second Issue: The next two pics show the thread pass smoothly past the part that it hung up on before but when it does, the thread puller sometimes catches the thread and splits it before it has time to tighten the stitch up and then it either gets hung up in the bobbin and skips a stitch on top of the vinyl.
https://www.dropbox.com/s/jz954beko7...%2053%20PM.jpg
https://www.dropbox.com/s/7rqjtj2zp8...%2055%20PM.jpg
Other than this occasional hangup, its sewing pretty good.
Reply With Quote