Originally Posted by jackfrost51
hey got a 77 350 hei ingition had some problems with breaking caps on the firewall do to low clearnce issues and jumping on the gas finaly broke the disbuter no spark so i had to replaced it with a boneyard one work for a week then died new coil new cap new rotor no spark at the wires so test right off the coil with the cap off got spark at the coil non at the wires ok got anther on from the bone yard got spark but only once every 5 seconds or so normal cranking speed ok replaced the ignition module better but still seem slow inline tester between the plug and wire slow spark no start any ideas in a 1956 belair
Sorry dude...I have read this post 5 times and still have no idea what your trying to tell me..
Try it again, use paragraphs..spell check, and focus on the problem ... I'll try again..
FROM WHAT YOU POSTED I would say you have a broken left motor mount...but I know that is not what your asking ..that was just side bar information.
Sory try it again...just the facts..sir...