Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - SPI clearcoat instructions...6 coats???
View Single Post
  #14 (permalink)  
Old 04-18-2006, 01:41 PM
Springer Springer is offline
Registered User
 
Last photo:
Join Date: Feb 2006
Location: ny
Posts: 37
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
every bike I do gets a min of 6 coats depending on the graffics. remember alot gets sanded off . Never had a comeback due to clear failure.This is my bike that I just finished it has 7 coats of HOK but sanded with 500 after 3 ,then again after the 5th and followed with 2 flow coats
rear fender phantom flames


Gas tank, And see the phantom flames live up to ther name as the tank is flamed also. Just cant be seen at this angle



have to get enough clear or u will rub thru the clear and ruin maybe 100 hours of paint ..

I would never do this on production work ..

Last edited by Springer; 04-18-2006 at 03:46 PM.
Reply With Quote