|
|
|
08-22-2005, 12:36 PM
|
||||
|
||||
|
SPI EPOXY PRIMER vs DP OR DPLF
In reading this forum nurmerous people have indicated that PPG's DPLF epoxy primer doesn't have the same qualities (adhesion for one) that the old DP epoxy had. Can someone that has used PPG and SPI products tell me how the qualities of SPI epoxy compare to both of PPG's epoxies.
Thanks! Bruce 
|
|
08-22-2005, 03:28 PM
|
||||||
|
||||||
|
I have used both. I first primed my frame with DP PPG red, followed by a black coat of DuPont Imron. Months later while working on my car I removed some masking tape from the frame that I had on it to indicate the front wheels centerline. To my utter dissapointment when I pulled it up so did the DP and the Imron, down to bare metal. The frame was new and very clean, had been gone over completely with a tiger disc, wiped several times with PPG DX330 until the cloths were clean.
I have since use some SPI epoxy primer and it seems to grab much better than the DP, and it is a whole bunch cheaper. Vince
|
|
08-22-2005, 07:30 PM
|
||||
|
||||
|
SPI is good stuff. Barry is nice guy to talk to. I'm using everything from them primer to the clear.
|
|
08-22-2005, 09:34 PM
|
||||||
|
||||||
|
you wont be sorry
using spi epoxy primer i did my floors with the white and my engine bay and frame with the black you get it thru baker pbe warehouse but you have to order thru spi .mike
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Maaco vs. At-Home Paint Job | nightrain_rod | Body - Exterior | 127 | 08-26-2012 03:07 AM |
| Self Etching or Epoxy Primer | Ron M | Body - Exterior | 14 | 11-30-2010 06:23 AM |
| SPI Epoxy primer tip size ? | rick458 | Body - Exterior | 16 | 06-16-2006 04:52 PM |
| purchaced spi epoxy primer | staircasesurfer | Body - Exterior | 6 | 05-30-2005 04:14 PM |
| SPI Epoxy Primer Opinion | Ron M | Body - Exterior | 3 | 09-08-2004 10:55 AM |
