|
|
|
10-16-2004, 12:09 PM
|
|||||
|
|||||
|
SPI Epoxy Question
I've got two coats of Spi epoxy on now.Its seven days old today.Do I need to scuff it and shoot another coat of epoxy before I spray on Spi 2K??
|
|
10-16-2004, 12:17 PM
|
|||||
|
|||||
|
No just scuff 180-320 and go to primer. Before 10 days.
|
|
10-17-2004, 01:53 PM
|
|||||
|
|||||
|
Thankyou for the info Barry,however I've run into another problem.There was a couple of spots that looked like they needed filler so thats what I did.Now I've sanded through the epoxy down to the bare metal.I assume now I should scuff the whole area and shot another coat of epxoy before the 2K?
|
|
10-17-2004, 01:58 PM
|
|||||
|
|||||
|
If they are the normal 1-2 Inch size type missed ping dings, I would most likely just go to the 2K. If bigger than may be a good idea to coat with the epoxy.
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
