Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - spot repair
Thread: spot repair
View Single Post
  #5 (permalink)  
Old 04-03-2013, 07:25 AM
vhehn vhehn is offline
Registered User
 
Join Date: Apr 2013
Posts: 6
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Quote:
Originally Posted by 69 widetrack View Post
What color is it that has the scratch...is it dark or light...also do the graphics go from one end of the quarter to the other end? Again if you would give me a bit more information and if possible post pictures, I will do my best to give you some tips...even though Acrylic Urethane is much harder to blend than BC/CC or even Acrylic Enamel.

Ray
don't have a pic right now. the color is a dark maroon. the graphics go most of the length of the quarter but not all the way to the end so there is no line to tape to.
the graphics are about 15 inches from the actual repair but are not involved in the repair. they only enter into the repair by the fact that if I did the whole quarter I would have to destroy them.

I have found some info on a product called Sherwin-Williams products BS10. it is supposed to help blend repairs. don't know how it works though.
Reply With Quote