Hot Rod Forum banner

Squeezed the LT1 into the Tudor

970 views 3 replies 3 participants last post by  killeratrod 
#1 · (Edited)
Just a few progress pics to point out some of the spacing issues we had.
Lt1 with 4L60e in pinched 32 rails. Even with the Hooker Block Huggers we ended up with 3/4" spacing on each side.

Wheelbase set at 107"...even with that we needed 2" setback on the firewall.

Cardboard mock-up for fab planning (in progress)
 

Attachments

See less See more
5
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top