Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - squirrel cage blower for shop fan
View Single Post
  #9 (permalink)  
Old 06-05-2013, 01:58 PM
charleydodge charleydodge is offline
Registered User
 
Join Date: May 2013
Posts: 9
Wiki Edits: 0

Thanks: 1
Thanked 0 Times in 0 Posts
ok tcoop, here's the skinny. i pulled my fan out of mothballs to give you this info. my cage is 12x13 with an adjustable slide damper. the motor is a 1/4 hp, 115 volt 1725 rpm at 4.6 amps. type sp. this motor is dated 1968, so i don't think the part number would help. i hope this helps.
Reply With Quote