Hot Rod Forum : Hotrodders Bulletin Board

Hot Rod Forum : Hotrodders Bulletin Board (http://www.hotrodders.com/forum/)
-   Suspension - Brakes - Steering (http://www.hotrodders.com/forum/suspension-brakes-steering/)
-   -   Steering Box compatability (http://www.hotrodders.com/forum/steering-box-compatability-225212.html)

Jim7231 10-20-2012 02:48 PM

Steering Box compatability
 
I have a Vega box on my '32 Chevy Sedan and it needs to be replaced. Will a Saginaw 525 manual box bolt in place the same as the Vega box. I realize I have to change couplers and adjust input shaft length. Thanks.

Highball 11-17-2012 08:12 PM

Steering Box compatabilty
 
2 Attachment(s)
Here is a '32 Confederate with a 216 inline and it required a steering changeout. I used a Hudson steering gear box I obtained in a trade. I did have to do some realigning but the parts were all obtained (Universals, etc.) through Borgeson. Once I found out about that firms selection of quality products it became a very easy but still time consuming job.
Normbc9


All times are GMT -6. The time now is 09:03 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.