Hot Rod Forum banner

Stroker flywheel

1K views 1 reply 2 participants last post by  E.Furgal 
#1 ·
I have a 383 stroker that is internally balanced. Forged 400 crank and have starter issues. I put on a 168 tooth 350 flex plate and it does not seem to go on right {straight}. I also have another 168 tooth that seems to push the outside of the plate towards motor the way it is built. When the starter turns it will not disengage all the way. Is there a diffferent flex plate for the 400 crank that is not externaly balanced or do I have other issues. Any help appreciated.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top