Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Suspension for Jaguar IRS for Kit
View Single Post
  #8 (permalink)  
Old 01-21-2013, 10:52 AM
aosborn's Avatar
aosborn aosborn is offline
Registered User
Last wiki edit: Suspension: designs, shapes, sizes Last photo:
Join Date: Oct 2008
Location: Lakewood, WA
Posts: 621
Wiki Edits: 7

Thanks: 0
Thanked 18 Times in 17 Posts
Well, after too much time, this is what I came up with for spring recomendations...

Front=500lb/in for sport touring mode
650lb/in for track mode

Rear=300lb/in for sport touring mode*
350lb/in for track mode*

*rates are calculated assuming you are using 2 coilovers per corner or 4 springs total on the rear axle

If you are buying coilovers, allow 2/3 of the available travel for bump and 1/3 for rebound typically. For a coilover with 5" of travel for example, use about 3 1/2" for bump, and 1 1/2" for rebound.

Again, sorry for the delay. I hope these figures can still do you some good.

Keep us posted.


Reply With Quote