|
|
|
07-19-2006, 06:49 PM
|
||||
|
||||
|
swaping 305 for the 350
I have a (93) 305 what all do I have to change in order for the 350 to fit in an do I have to do computer work
|
|
07-19-2006, 07:06 PM
|
||||||
|
||||||
|
no, all you have to do is take the top end off and put it on the 350 then slap it back down in there and bolt it up. are you using your heads off of the 305?
J
|
|
07-19-2006, 07:19 PM
|
||||
|
||||
|
No I have a 350 long block. People told me I might have to do a 350 throttle body cause the 305 run lean compared to the 350 running rich what do you think
|
|
07-19-2006, 08:35 PM
|
||||||
|
||||||
|
as far as i know a throttle body is a throttle body it dosn't matter what motor it's off of. ask them people if they have piston return springs
 what year is the 350 block and heads? the reason i ask b/c the pre 87 heads won't line up with the holes in the intake correctly b/c of the angle of the holes in the head unless you have the intake milled. i think it's easier just to get a set of 87 and younger set of heads  J
|
|
07-20-2006, 04:42 AM
|
||||
|
||||
|
I have a 93 so i am ordering a crate motor for that year I heard about the the holes lineing up with the intake manifold
|
|
07-20-2006, 09:06 PM
|
|||||
|
|||||
|
I've heard the 350 uses bigger injectors on the same throttle body, a different chip in the computer, and a different knock sensor.
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Distributor Tuning and Theory - Part 1 | Rick WI | Engine | 35 | 04-26-2011 12:38 AM |
| 1991 Firebird: Conversion from 305 to 350 | Chevy21 | Engine | 6 | 03-22-2005 12:28 AM |
| Will this work? Chevy 305 Throttle Body w/ Chevy 350 | aberg12012 | Engine | 9 | 05-07-2004 12:28 AM |
| Will chevy 305 HO heads fit on a 350? | sugarmonkey | Engine | 5 | 01-16-2004 07:07 AM |
| 350 Heads on 305? | JohnyR17 | Engine | 6 | 01-05-2004 08:53 PM |
