Hot Rod Forum banner

T-400 shifter shaft seal

577 views 2 replies 3 participants last post by  S10xGN 
#1 ·
what do I have to do to replace seal
 
#3 ·
If it's made like a 200R4, I took a packing tool (looks like a self-tapping screw on a screwdriver handle), screwed it into the seal between the shaft and case, then yanked it out. I'd imagine a screw and vise-grips would do the same...

Russ
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top