Hot Rod Forum banner

T bucket body demensions needed

4K views 3 replies 3 participants last post by  timothale 
#1 ·
i need body demensions so i can continue to fine tune my t bucket plans

the list of info i need

firewall width
firewall height
body length (top of firewall to top of rear of body)
body length (bottom of firewall to where the body comes off the frame @ rear)
body width @ widest point
body height at rear


and if your using a bed or turtle deck

width @ front
width @ rear
overall height @ front

thanks in advance to anyone that helps me out
 
#4 ·
t bucket info

I have 2 glass t buckets and a steel body I found in 1951. also horseless carriage t stuff. Ford made different sizes of bodys. 1915 to mid 22 23 to 25 and 26 27. a lot of after market bodies don't follow fords original designs before 1915 T 's had a wood straight firewall and almost flat sides for the bucket
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top