just went and bought a new modulator and replaced /rerouted the vacuum lines just in case.Put it on jackstands.The wheels are turning in 1-2-3 and neutral,reverse is fine.The only time I feel any kind of shift is when I downshift to first.I would say its stuck in first BUT, the 2-1 manual downshift feels normal.
If the 1-2 shift regulator in the 1-2 shift valve was seated crooked,what issues would that cause?My 1-2 shift valve was a little tough to get the roll pin back in(too tight?)
Leaving for north dakota in the a.m. hoping to get this resolved today. It IS the type 1 valve
Last edited by gunsaler111; 10-12-2012 at 02:22 PM.
Reason: more info