Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - tbi on 70 350 sbc
View Single Post
  #3 (permalink)  
Old 09-05-2012, 10:48 PM
SSedan64's Avatar
SSedan64 SSedan64 is offline
Registered User
 
Last photo:
Join Date: Dec 2007
Location: Macon, GA.
Age: 50
Posts: 6,016
Wiki Edits: 0

Thanks: 0
Thanked 46 Times in 46 Posts
Using the same .015" shim gasket w/193 Head will bump Cr. up about 1 point.
4.00" Bore X 3.48" Stroke.
.025" Deck Ht., .015" Gasket.
5cc Piston, 76cc Head, .040" Quench = 9.03Cr
with 65cc Head = 10.16Cr

May not be low octane Pump friendly.
Reply With Quote