Hot Rod Forum : Hotrodders Bulletin Board

Hot Rod Forum : Hotrodders Bulletin Board (http://www.hotrodders.com/forum/)
-   Engine (http://www.hotrodders.com/forum/engine/)
-   -   tbi to vortec (http://www.hotrodders.com/forum/tbi-vortec-225880.html)

TSCHEVY 11-08-2012 08:51 PM

tbi to vortec
 
is anyone running 350 hot cam with 906 vortec heads flat top pistons with ls6 springs. and what hp can be expected ?

oldbogie 11-09-2012 11:50 AM

Quote:

Originally Posted by TSCHEVY (Post 1608871)
is anyone running 350 hot cam with 906 vortec heads flat top pistons with ls6 springs. and what hp can be expected ?

Depends on rocker ratio, porting, intake and exhaust systems and other things about the details.

Generally a 350 with the LT4 HOT cam, 9.5 compression with 1.6 rockers, well ported Vortec heads, Edlebrock Performer RPM intake with a 750 Holley, and 1-3/4 inch long tube headers should pull in the range of 400 to 420 hp on an engine dyno.

Bogie

TSCHEVY 11-09-2012 08:37 PM

i am trying to stay with the tbi unit if possible or going to a big block tbi and a diffrent chip dont know on the headers yet. just a low budget project for me and the son. trying to find out his intrest and us do something together


All times are GMT -6. The time now is 07:21 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.