|
|
|
02-10-2012, 10:31 AM
|
||||
|
||||
|
Th350 into 48 Plymouth questions
I plan to drop a sbc and th350 out of a early 80's Chevy 4x4 into my 48' Plymouth Coupe...I'm not sure exactly what I need for the tranny as it has a transfer case...is it the tailshaft that I need to complete the trans? any other parts that you can think of?
I have the whole truck so before I scrap it I would like to get everything I need. Was also thinking on using the steering box on the Ply. 
|
|
02-11-2012, 03:01 PM
|
||||||
|
||||||
|
The 4X4 TH350's that bolt directly to the Transfer Case have a shorter 9-1/2" Output Shaft. It would need to be replaced with a 2X4 Shaft and the correct length Tailhousing used.
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Floor Shifter for TH350 in 47 Plymouth | kbuhagiar | Transmission - Rearend | 5 | 04-05-2011 12:12 PM |
| TH350 questions... | nick7777 | Transmission - Rearend | 3 | 02-10-2011 01:03 AM |
| 49 plymouth questions | snids53 | Suspension - Brakes - Steering | 4 | 06-16-2009 07:37 PM |
| the plymouth.... A FEW QUESTIONS AND PICS | h0trod389 | Hotrodding Basics | 11 | 05-03-2007 12:32 AM |
| TH350 questions | chrisflock | Transmission - Rearend | 9 | 03-24-2006 08:56 PM |
