|
|
|
02-19-2003, 01:25 PM
|
|||||
|
|||||
throttle return spring bracket
I have a Edelbrock Performer RPM Air Gap intake with a holley duel feed double pumper carb w/ 14" air cleaner. Right now i just have a return spring hooked onto one of the water neck bolts. Is there any bracket out there that would work in my situation?
Thanks Brian 
|
|
02-19-2003, 01:29 PM
|
||||||
|
||||||
|
I make my own brackets and have 'em chromed. That way I am not stuck with the few after market designs out there. Also, go to my photo album for a diagram of how to and how not to hook up a return spring. Amazingly there is a right and a wrong way to do it.
|
|
02-19-2003, 02:34 PM
|
||||||
|
||||||
|
Morosso and Holley sell brackets that bolt on the left front bolt of the carb. It comes complete with two sets of springs, etc. There are also brackets that use the front two bolts on the intake, but you have to use your own spring and kind of guess about the spring tension.
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
