Ive built a tilt front end for my rod and am looking for guide pins and latches . I have some junk yard stuff but am wondering who makes COOL stuf before I weld this thing up for my used parts

If you sent some pictures of what you have and describe what you want "including measurements" I can give you an idea of what it would cost.

__________________
I'm actually making progress on my 1988 Suburban TH-700R4 to SM-465 transmission swap, CLICK HERE TO CHECK IT OUT.
CanAm Chevelle Club
700R4 Basics
700R4 Basics W/pics
______

Thanks M&M but I 'm not looking for a cost est. just a source for alignment pins and latches

Let me explain further. I didn't mean I would sell you the hardware you need, but maybe help you find it.
I may be able to find you what you are looking for, but I have no clue what you have or what you want.
Is this a manual or powered tilt, manual can be assisted by trunk or hood nitrogen assist cylinders and some of these units are very strong and small, and they could also act as alignment guides if set up right.
You gave just enough information to let me know that you should be able to build what you want, but it also sounds like you aren't really sure of what you want.

__________________
I'm actually making progress on my 1988 Suburban TH-700R4 to SM-465 transmission swap, CLICK HERE TO CHECK IT OUT.
CanAm Chevelle Club
700R4 Basics
700R4 Basics W/pics
______