Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Timing woes
Thread: Timing woes
View Single Post
  #1 (permalink)  
Old 10-04-2012, 04:42 PM
Camtech30 Camtech30 is offline
Registered User
 
Join Date: Oct 2012
Posts: 1
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Timing woes

Allright then, I have an 84 monte carlo ss, sbc 350. Components are as follows

Crane blue racer
488/510 lift 234/244 druration @ .50 300 total lobe sep 112
eagle cylinder heads 2.10/1.60 valves 210 runners
edel victor junior intake
edel 750 #1407

this info given to me by previous owner.
It had an HEI dizzy, I have swapped out with MSD pro billet dizzy, 6AL box, and ss coil. Ignition timing locked set and set to 38*. 1434 jets with 1456 rods, 1432 sec. set 1 stage rich according to edel calibration specs. Cars does great with wot, but at cruise its fine until you mash throttle then hesistates, then grabs and goes. I am looking for a good throttle response theough the RPM range. I think this cam is a roundy round cam or something in that ballpark, I was looking for a lil input on switching cams and what would work best and advice would be greatly appreciated!
Reply With Quote