trans. is it a 700r4?
i am doing up a 1965 chev. stepside p.u. i took a 1986 chev suburban removed front end saddel and replaced the 65 with it. giving me power steering and power disc brakes. i also installed eng,trans&rear end every thing fit just fine . my question now is on the trans that i think is a 700r4 there is a plug on drivers side it has two wires cut off i think it is for the lock up converter . where do these wires come from or how do i hook it up?
thanks for any help ed. :welcome:
Here's how I have mine wired.
thanks for responce but cannot read it too small
i thank you for your responce but at full mag. still cannot read it. is there someway you can send it in larger detail?
Ed, right click and copy the picture Shortcut, then open it in a new Browser or click this Link below >> http://www.hotrodders.com/forum/atta...chmentid=60266
Was the Wiring Diagram still too small when you clicked on the Thumbnail Pic?
Several TCC Lockup wiring Diagrams here:
|All times are GMT -6. The time now is 04:05 PM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.