Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Transgo Mod - Rear Servo Washer Stack
View Single Post
  #1 (permalink)  
Old 09-01-2006, 07:18 PM
68NovaSS's Avatar
68NovaSS 68NovaSS is offline
Last wiki edit: Working with chromed bolts
Last journal entry: New to me T-Bucket
Last photo:
Join Date: Sep 2002
Location: Wasilla/Meadow Lakes, Alaska
Posts: 6,036
Wiki Edits: 9

Thanks: 278
Thanked 279 Times in 240 Posts
Transgo Mod - Rear Servo Washer Stack

I posted this on the tail of another thread, different issue, but re-posted here hoping someone will respond. I tried to call TransGo tech but no answers, probably too late in the day.

I bought a full manual Transgo-S kit but have an issue with the rear servo modifications. I removed the inner spring, seat and e-clip and installed the six washers as directed. I cannot get it even close to meeting the mounting surface with the cover, so started removing washers. Long story short, to get the cover to mate I removed all but two (leaving the original washer). Now I need to remove two additional to allow for band clearance. Heck, that puts me back to the stock configuration only with no spring and seat! I even removed the O-ring to ensure I was pushing it all the way up.

Anyone installed one of these kits? Am I missing something?
Reply With Quote