Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - trouble shooting
View Single Post
  #1 (permalink)  
Old 06-25-2004, 10:23 PM
68bird 68bird is offline
New Member
 
Join Date: May 2003
Location: Canada
Posts: 28
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Unhappy trouble shooting

Hey there guys.
Iím just wondering if I could get some help, heres the situation. I recently put a newer engine and transmission in my firebird. The engine I put in was a 305 with (what Iím told anyways a turbo 400 transmission). There were some problems with the carb so I reasently replaced the old quadrajet with a brand new edelbrock 650cfm and the intake manifold with a band new edelbrock manifold. This was my first time doing this kind of work. I followed the instructions with everything and hooked up all the vaccuum lines just like before but now the tranny doesnít shift god at all. I was told to make sure the vacuum line was hooked up but I canít find one on the transmission is it possible that there isnít one? Because I donít remember unhooking one.

Thanks Mike