Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Troubles with SBC 350 rebuild
View Single Post
  #25 (permalink)  
Old 10-25-2009, 09:25 PM
Short_box Short_box is offline
if it can go wrong it will
 
Join Date: Aug 2009
Location: Virginia
Age: 29
Posts: 49
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Im having the same issue. I have a 350 bore 60 over .510 lift cam vic jr +1 intake holly 750 double pump nothing special with maybe 35 miles on it and since day one when i did my cam brake in its had bout 30psi on cold start up, 50psi at cruising speed, and once warmed up at idle my guage will hit 0 but still oil coming out my pushrods/rockers. Ive got 2500 invested in just the short block parts and labor to put it together and im not trying to have it go to **** and the guy who built it dont have an idea why its doing that wich has me worried even more. I dont believe the high volume pump will work cuz i was told it was a high volume low pressure pump. Im no engine builder i can tune but cant build so a lil more help on those plugs some guys have mentioned would help me out alot. Thanks for everyones time.
Matt
Reply With Quote