[Mikey_mike]

Hey guys,
I was wondering if there is any difference in between a "pipe bender" and a "tube or tubing bender".

[astroracer]

It's good you asked... Look here... http://www.lowbucktools.com/benderFAQ.html
Everything you need to know....

Mark

[Mikey_mike]

Thanx Mark....now i know

[bullheimer]

my hydralic pipe bender for electrical conduit bends either or with nice mandrel bends

[Eddie Paul]

Originally Posted by Mikey_mike

Hey guys,
I was wondering if there is any difference in between a "pipe bender" and a "tube or tubing bender".

the tube is measured by the O.D. the pipe is measured by the I.D. so the dies are different sizes. but you can bend either on a good machine if you have the corect dies.
Eddie Paul

[zixxer6]

Originally Posted by Eddie Paul

the tube is measured by the O.D. the pipe is measured by the I.D. so the dies are different sizes. but you can bend either on a good machine if you have the corect dies.
Eddie Paul

Hey man whats with the diggin up old threads? And your answer is exactly what Astroracer's post said six years ago.