turbo 350 speedo drive to VSS

Eric64 · #1 (**permalink**) 06-26-2005, 10:41 PM

I've been checking the internet trying to find a reasonable way to provide a signal for a TBI setup using the mech.cable speedo drive but still have a signal for the TBI system. someone told me there was some sort of an adapter where you remove the stock driven gear and insert where the cable screws onto the tail shaft and this box provides a signal. All I've found so far is the complete tailshaft conversion ranging between 400-500 a little steep in my book, Any answers out there. Thanks, Eric

Crosley · #2 (**permalink**) 06-27-2005, 08:00 AM

visit : www.jagsthatrun.com

look into their list of speed-O adapters

Quote:

Originally Posted by Eric64

I've been checking the internet trying to find a reasonable way to provide a signal for a TBI setup using the mech.cable speedo drive but still have a signal for the TBI system. someone told me there was some sort of an adapter where you remove the stock driven gear and insert where the cable screws onto the tail shaft and this box provides a signal. All I've found so far is the complete tailshaft conversion ranging between 400-500 a little steep in my book, Any answers out there. Thanks, Eric

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help with Turbo 350...	Jason_R	Transmission - Rearend	1	09-26-2003 07:12 PM
350 Turbo, Help	Blazemore	Transmission - Rearend	2	09-03-2003 06:24 AM
Turbo 350	1980 Malibu	Transmission - Rearend	14	07-27-2003 04:24 PM
what do i need to build a twin turbo 350	chevylovingfarmboy	Engine	2	03-16-2003 01:18 PM
350 turbo or 400 turbo?	nd500	Transmission - Rearend	2	02-21-2003 08:25 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)