|
|
|
06-11-2012, 01:54 PM
|
||||
|
||||
|
V6 Vortec crate engine problem
I installed a crate marine engine into my boat last summer. By summer's end I was not happy with it's performance. I did a compression test and found some of cylinders half that of the others on one bank. (I should mention that this is a V6 Vortec Mercruiser Marine engine year model 2010 with roller rockers.)
I am not an engine builder; I know enough to be dangerous. The only assembly work I did on the engine was to install the intake manifold (with new gaskets). This new engine now has about 10 hours on it. I am assuming that the problem is in the valves, but I don't know. Where should I start? Thanks! 
|
|
06-11-2012, 02:21 PM
|
||||||
|
||||||
|
Get back with the ones you purchased the motor from.
If it was GM they have a good warranty. If you touch the wrong thing it could causr the warranty to be void.
__________________
Luv the smell of NITRO in the morning.
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Computer chip for 96 5.7 Vortec performance crate engine | chucksrt | Engine | 12 | 12-01-2010 11:39 AM |
| TBI on vortec engine problem | wiegs78 | Engine | 4 | 03-19-2010 02:33 PM |
| 350 Crate Engine: Loud humming sound after engine warms up | sofa1515 | Engine | 2 | 01-11-2010 06:48 PM |
| Vortec Engine Problem | DougA | Engine | 2 | 08-03-2009 12:43 AM |
