This isn't really a hot rod but you guys looked really helpful in all the articles I was reading.
I have a 85 jeep cherokee with a 2.8 v6, manual 5 speed, bone stock.
I'm in the process of swapping in a 350 vortec out of a 96 yukon, with a 700 R4 out of I believe a late 80's 1500, and a 208 t-case out of a 84 1/2 ton, along with the rest of the drivetrain, so no computer controls there.
I have the harness and computer that came with that engine.
What I would like help with is acquiring schematics from both vehicles to splice the harnesses. All attempts up to this point for this swap have come up short of detailed schematics.
Alldata and my Haynes and Chiltons manuals dont get real specific.
I'm real anal when it comes to doing it right so I would like to get as much info as I can before I cut the harnesses.
Any help would be appreciated. Thanks