Hot Rod Forum : Hotrodders Bulletin Board

Hot Rod Forum : Hotrodders Bulletin Board (http://www.hotrodders.com/forum/)
-   Interior (http://www.hotrodders.com/forum/interior/)
-   -   walknig foot for a phaff1425/26 (http://www.hotrodders.com/forum/walknig-foot-phaff1425-26-a-197774.html)

camberoz 05-03-2011 09:58 AM

walknig foot for a phaff1425/26
 
all this time i have been using a rather old phaff sewing machine and i only have a welt foot for it. I think is about time that I pony up and get the right tool for the job. is their any place online i can find parts for this

model number is a phaff 1426

DanTwoLakes 05-03-2011 10:08 AM

You can use a 1/4" welt foot to sew flat seams, that's what's on my sewing machine 95% of the time. I almost never use a plain presser foot.

Are you sure your model # is Pfaff 1425? The 1425 is a newer expensive machine, and has been discontinued, so parts may be scarce for it. Could it be a 1245?

If so, CLICK HERE

BTW, a 1246 or a 1426 is a double needle machine, not a single needle machine.

camberoz 05-03-2011 12:23 PM

about 95% sure its the 1425, i have to look at it again when i get home

thanks for the reply though

DanTwoLakes 05-03-2011 12:39 PM

The 1425 costs over $5000 new, and it is a modern machine. How old is the one you have?


All times are GMT -6. The time now is 09:01 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.