|
|
|
04-19-2007, 05:11 PM
|
||||
|
||||
|
Wanting to use GM rotors and calipers on Mustang II spindles
I am building a 54 chevy pickup and have a mustang II front end but would like to use the bigger GM rotors. Any advice for part numbers or caliper brackets would be greatly appreciated!! Building a rat-rod for my 16 year old
|
|
04-19-2007, 07:07 PM
|
||||||
|
||||||
|
78 Malibu rotors with the inner race changed to Ford bearing. I use these on old Ford beam axles also. As for brackets, several different ones are available, depending on what caliper you want to use. try Speedway.
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| It's a Mustang II, but what's in it? And a brake problem . . . | hduff | Suspension - Brakes - Steering | 4 | 11-19-2006 06:00 PM |
| Identifying GM calipers | RabidScott | Suspension - Brakes - Steering | 2 | 08-16-2006 10:24 AM |
| Later than Mustang II IFS | moparist | Suspension - Brakes - Steering | 9 | 06-09-2006 07:09 PM |
| Mustang II Home Alignment | Ron M | Suspension - Brakes - Steering | 2 | 07-17-2004 11:08 PM |
| mustang II brakes, spindles and caliper stuff | jniolon | Suspension - Brakes - Steering | 2 | 06-25-2002 05:21 PM |
