Hot Rod Forum banner

Weiand 250 Pulleys

2K views 8 replies 4 participants last post by  illenema 
#1 ·
Are the pulleys swappable between weiand 250 and blowershop 250, want to try to convert to gilmer on the BS 250
 
#7 ·
From what I have figured out the B&M Gilmer ones are a held on to the bower with four bolts. part #s 91000-91005. These are all listed as available on the Weiand website except for the smallest one 91005. This seems to make them unique to the 250. All the other gilmer ones I see have six mounting bolts.
I have no pulleys for my ones here.
I also need the bottom pulley Part # 91097 SBC or 91089 BBC
Best I can tell these ones bolted right onto the balancer.
I have a 2V accessory belt as well and am currently running a B&M 162 with short waterpump.
If anyone can post regarding ony of these they may have for sale or info on alternate fitments i would appreciate it.

I am also after a means of connecting a lower pulley of a B&M 420 to a SBC and any pulleys for that as well.

Cheers
Wayne
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top