This is my inaugural post on this forum although I have been reading quite a bit on hotrodders bulletin board. Since I am new go easy on me
I know this subject is been beaten to death many times but I do have a couple more questions.
I am building a booth as many of you have. The flow of air, what I call weird flow is illustrated in the image.
Two 1000cfm inlet fans mounted on the south wall to insure air change every about 2.5 mins. No exhaust fans (I don't have access to explosion proof fans ) only exhaust filters mounted on the top east side of the booth.
Is it ok to have the booth flow like that with the inlet on the south side and the exhaust on the top east side?
Also the total volume of the room is about 4500 cubic feet. So is two 1000cmf fans over kill without exhaust fans?
Thanks guys, props to all the info on this site, very helpful.
I know this subject is been beaten to death many times but I do have a couple more questions.
I am building a booth as many of you have. The flow of air, what I call weird flow is illustrated in the image.
Two 1000cfm inlet fans mounted on the south wall to insure air change every about 2.5 mins. No exhaust fans (I don't have access to explosion proof fans ) only exhaust filters mounted on the top east side of the booth.
Is it ok to have the booth flow like that with the inlet on the south side and the exhaust on the top east side?
Also the total volume of the room is about 4500 cubic feet. So is two 1000cmf fans over kill without exhaust fans?
Thanks guys, props to all the info on this site, very helpful.