Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - What am i missing in my brake setup?
View Single Post
  #9 (permalink)  
Old 04-06-2012, 02:03 PM
luckynumberslevin luckynumberslevin is offline
Registered User
Last photo:
Join Date: Aug 2010
Location: Edmonton, canada
Posts: 60
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Ok so i did a little hunting and this is what i came up with.

I plugged the front line on the MC and only got approx 1/4 to 1/2 stroke on the pedal and then a dead stop. I removed the front plug and plugged the back, right off the residual valve and i was still able to put the pedal right to the floor. So then out of curiosity i put the lines back on normally and well the pedal still goes to the floor. Their is defiantly resistance but no hydraulic lock.
Reply With Quote