[Silentlion_69]

hey I wasjust wondering what you guy's projects were? or what past projects you guys have already done? I'm working and saving up for a project car right now. well just thought it'd be cool to see some pictures and hear what you all are breakin your knuckles on.

[dhaza]

[cheezbay]

1963 Chevy pickup
1931-33 Chevy - now for sale
1966 Pontiac LeMans - new project

Check my gallery for pics of them all.

[Gen3_with_455]

[Magnus_Jager]

Current

1954 Dodge Coronet 241 hemi - Plan resto, see my gallery.

1954 Dodge Meadowbrook - Plan Street Rod...

Past

1974 Duster Motor, trans, paint.

1970 Duster Motor, minor body work, paint.

1973 Duster Upgraded from slant 6 to 318. Replaced entire drive train to wheels. Replaced entire front suspension to upgrade to disc brakes. Started body and paint and had to start driving it. Sold when I bought my house three years ago.

[BigBlockBabe]

1978 Bronco Ranger XLT

[mustangman1968]

presently im puting a 8"rearend in place of the 6 cyl one on my 68 stang. after that a new distributer, disc brake 5 lug conversion. and then some new cragers. just enough to keep it roadworthy until the teardown after i go to wyotech. i plan on making it a 10-9 second street-strip-show car. yes i know it will take me about 10 years and a ***** load of money but yeah my project is doing good just costin me to much money

[kidcuda]

1972 El camino with a 350 that I plan on stroking to a 383. Slam it, Tub it, and Drag it.

[38 special]

<<<<<Ooops! There it is! Ooooops! There it is! 38 DeSoto
Past project, 49 Willy's Jeep. C2.

[astroracer]

<<<<<<<<< My truck, ongoing... A '73 firebird, ongoing... A '31 Model A Tudor sedan, it's own basket and an '88 Astro van that is getting slammed, tubbed and big Blocked...
That's all...

[FASTCHEVY]

I'm always adding on little doodads to my 77, but I have a 37 Willys sedan project.
And any 73-87 Chevy truck I can get my hands on.

[Hippie]

I'm swapping a 4.9 V-8 from a '95 Cadillac DeVille into a 1995 Monte Carlo Z34. It's about a 95% straight bolt in, the biggest issue is rewiring one wire harness connector and having new AC lines made. I have the engine and the Monte and am working on rounding up the rest of the pieces I want for it. I'm having the transaxle rebuilt with all HD components and I need to work a limited slip into the budget, they make 'em for FWD but they're about double the cost of a RWD unit. It will also be getting a 3.73 final drive while it's apart. Exterior mods will be minimal, a 2" drop, removal of the Z34 badges and Monte script, a rear spoiler and the addition of black crossed flag emblems from an '82 Vette to the front fenders similar to the Fuelie flags on the '57 Bel Air's, after all it IS a Fuel Injected V-8 and not much bigger than the 57's 283............ Here is what it should look like when finished....


[SIZE=1](This is not a photochop of my actual car, this one just had a nicer setting than any of mine.)[/SIZE]

Oops! Almost forgot the sound system !!! Tunes will be via a K & N open element air filter, a high flow catalytic converter and an Edelbrock Performer RPM crossflow muffler for a late model Camaro. If nothing else the Cad 4.9's DO have a SWEET exhaust note .

[TwistedDragon]

Figure I might get snickered at a bit, but I'll say it anyways. I'm workin on a 1970 Volkswagen Beetle Sedan. I have lotsa plans for it, my latest drawing shows the route I'm taking with a front engine and lots and lots of cutting and welding.

[Weimer]

Here you go....
My Project
Later,
WEIMER