Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Wheel cylinder problem? brake lock up?
View Single Post
  #3 (permalink)  
Old 05-31-2005, 01:11 PM
72 chevy elcamino 72 chevy elcamino is offline
Member
 
Last photo:
Join Date: Oct 2002
Location: florence s.c.
Posts: 59
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Ok i went to get another brake cylinder and none i have found will work.i tried alot of places and tried npd and they have a different one as well. the cylinder is 2 and 7/8 boot to boot. i was given a 3" and it would not work. the brakes would not close enough to clear the rotor even fully adjusted in. the brakes are hitting the cylinder. i compared the cylinder to the other front brake and it is the same 2 and 7/8. the brakes are also the exact replacements for the shoes so the brakes are not the problem. im thinking ill have to rebuild the cylinder but there is no rebuild kit for the style i have. im going to order the bendix brand and see if it will work. never thought a cylinder could shrink over time and the new replacements grew to big lol

Last edited by 72 chevy elcamino; 05-31-2005 at 01:35 PM.
Reply With Quote