[stonedchihuahua]

I'm wondering, because they are supposed to be the same size but it just slightly won't fit in the holes.... I'm wondering if the axel I tried is somehow messed up.

if not does someone make adaptor plates to go from the ford 9 inch truck axels and to fit a camaro rim?

(I think my camaro rim is 4.74 inch lugnut spacing)

[CJ2AWILLY]

Blue oval and Chev are two different bolt patterns.

CJ

[Jason]

I sent my ford axles out to Moser Engineering, they specialize in axles. They redrilled them to the chevy bolt pattern.
It only cost $30 for the work................and $40 to ship them.
Call them, they will be able to tell you if they can do it for your particular application.

[axle bastard]

Originally posted by CJ2AWILLY
Blue oval and Chev are two different bolt patterns.

CJ

i put chrome spoke wheels off a bronco on my chevy blazer with no problem.
i don't think this will work, i think the 9"bolt pattern is 5"
my cutlass should have the same as your car, the wheels from my 9" won't fit my car.
BUT ...... i could be wrong.

[woodz428]

Yours= 5 on 4 3/4, Lincoln(9" should be the Versailles, the others are 9 3/8")=5 on 4 1/2", do the math