|
|
|
01-02-2012, 06:22 PM
|
|||||
|
|||||
|
Will This Holley Fit Under My Shaker Hood Scoop?
Hey guys I've decided on this carb. Did lots of research and this is the one. My question is will this fit under my shaker hood scoop base plate on my 1971 Challenger? I can't see why it wouldn't but just wanted to be sure before I bought it. Let me know. Thanks
Dave http://www.summitracing.com/parts/HL...50BK/?rtype=10 Last edited by daveh; 01-02-2012 at 06:49 PM. 
|
|
01-02-2012, 10:31 PM
|
||||||
|
||||||
|
You'll probably need to find one and do some measuring, unless someone has the exact setup, there's no other way we'd know.
__________________
Horsepower is how fast you hit the wall. Torque is how far you take the wall with you. Midnight Sun Street Rod Association
|
|
01-03-2012, 07:37 AM
|
|||||
|
|||||
|
Only thing that I can think of that MIGHT be different wuld be the height. I assume(hate that word,lol) you had an AFB or Thermoquad? just take some measurements . I don't think there would be a lot of difference,or at least not enough to cause a clearance problem. Now if you are using an aftermarket intake,that could be a totally different story. Do like 68 NovaSS said and see if you can borrow someones Holley for mock-up.
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Shaker Hood Scoop,Ram Log 2X4 429/73 Toreno. | PackMule | Body - Exterior | 1 | 06-19-2011 03:01 PM |
| 79 Trans Am Shaker Hood Scoop fit issue | Gladis | Body - Exterior | 3 | 03-07-2007 07:25 PM |
| Shaker Hood Scoop | oldskools10 | Body - Exterior | 2 | 09-05-2006 12:21 AM |
| Shaker Hood Scoop | Flame Red | Body - Exterior | 1 | 10-27-2003 03:21 PM |
| Mopar Original Shaker Hood Scoop?? | shaggy | Body - Exterior | 0 | 07-31-2003 10:13 AM |
