hey vicrod,
so i pulled up Shbox's diagram:
http://shbox.com/1/1995_pcm_conn_d.jpg
the D6 connector is part of my harness -- since i'm running an automatic harness i'll just use the wire that is currently in place. Where does the ground come in though?
Judging from here:
http://currentperformance.com/Connectors/LT1_LT4.html
It looks like the plug has 2 wires -- would i just wire the second black (ground) to any available ground? Or does it need to complete it's circuit through the PCM?