Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - won't start after running
View Single Post
  #3 (permalink)  
Old 09-12-2004, 01:22 AM
HARVICKx29's Avatar
HARVICKx29 HARVICKx29 is offline
2 much power is almost enough
Last photo:
Join Date: Oct 2003
Location: Buena Park, CA
Age: 33
Posts: 134
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
i've got some noid lights.. i'm gonna check that out tomorrow. the spark plug thing i'll try tomorrow as well. the reason for the replacement of all those parts is- starter+starter solenoid- burned up. the switch on the column was bad. the wires were replaced after finding 2 were broken. plugs were fouled up. cap and rotor just because everything else was being replaced. ign module because we had no spark originally. fuel filter because the one on the truck was nasty looking and it wouldn't hurt since i had one.... sorry i just wanted to explain myself so i didn't seem like one that just throws parts on hoping it'll fix it. :-)

but hey, i held a spark plug the other day to see if it had spark. shocked the bigeezuz out of me. i had those mechanix gloves on and was holding it at the boot. where do i hold it so i don't get shocked?
Reply With Quote