Jacks, Lifts, Dollies, and Stands

Easylift Airjack
by Jon

Discusses things to consider prior to purchasing a lift, such as dimensions, applications of 4-post, 2-post and single post lifts and in-ground lifts.

12-31-1969 07:00 PM
by Guest

Information about automotive lists, lift certifications, purchasing advice and a directory of certified lifts by manufacturer.

12-31-1969 07:00 PM
by Guest

Picture thread on the installation and setup of a 4-post Bend Pak lift. Includes user tips based on the experience of setting up the lift.

12-31-1969 07:00 PM
by Guest

Sample installation of a BendPak HD-9 four post lift in a garage. Details include: rough dimensions, choosing between 110v and 220v versions, ceiling height and garage door considerations, and safety features. Photos of different configurations...

12-31-1969 07:00 PM
by Guest

Pictorial guide to installing a Bendpak 2-post lift. Captions include instructions and tips for easier installation.

12-31-1969 07:00 PM
by Guest

Basic instructions and plans for building a dolly for a vehicle cab.

10-03-2005 11:08 PM
by Jon

Pictures and rough graphics for building a portable shop crane.

12-31-1969 07:00 PM
by Guest

Table compares Bendpak and Rotary 10,000 lb. asymmetric, 2-post lifts, according to column, arm, carriage and top beam construction, sheave material and diameter, equalizer cable diameter and thread adjustment rage, cylinder stroke, max rise,...

12-31-1969 07:00 PM
by Guest

Discussion thread on the operational and safety aspects of the Direct-Lift Pro Park 7. Thread starter is also looking for feedback on owners of these products, specifically with regard to structural integrity and problems with the safety mechanisms.

12-31-1969 07:00 PM
by Guest

Build information for a wooden engine dolly/caddy using 4 feet of 4x4, a single 8' 2x6, some 3" screws and casters with lag bolts.

12-31-1969 07:00 PM
by Guest

Subscribe to This Category Via RSS