Jacks, Lifts, Dollies, and Stands

Easylift Airjack
by Jon

Discussion thread for an engine test stand that was fabricated from scrap metal. Fabricated console holds starter toggle switch, coil switch and oil pressure, water temperature and amp gauges.

12-31-1969 07:00 PM
by Guest

How to select the right engine test stand through evaluation of loaded three-point turns, skid tests, footprint area, head adjustability, motorplate clearance, and rotating effort.

12-31-1969 07:00 PM
by Guest

Picture thread on preparing and installing dual beam supports and a galvanized pipe to support a 1300 lb capacity overhead electrical hoist.

12-31-1969 07:00 PM
by Guest

Discussions on car dollies and the recommended capacities of car dolly wheels.

12-31-1969 07:00 PM
by Guest

Picture gallery of homemade wood ramp and lift. Takes approximately 6 hours to fabricate with materials available from a hardware store.

12-31-1969 07:00 PM
by Guest

Public domain publication for a manual of Service Repair Sheets for servicing hydraulic jacks.

12-31-1969 07:00 PM
by Guest

Picture tutorial on servicing and repairing popular Taiwanese and China-made hydraulic floor jacks.

12-31-1969 07:00 PM
by Guest

Forum post on installing an in-floor scissor lift in a garage. Includes materials needed, removing concrete from the floor, installing rebar and wooden forms, pouring new concrete, finishing the concrete work, and installation of the scissor lifts.

12-31-1969 07:00 PM
by Guest

Explains the basics of hydraulic jacks and their maintenance. Covers check valves, bleeding, seals and fluid types.

12-31-1969 07:00 PM
by Guest

Review of the MaxJax lift. Includes transportation of the kit, installation information, and final testing using three different vehicles (Dakota pickup, VW Passat, and Z06). Includes tips on measuring and drilling the anchor holes.

12-31-1969 07:00 PM
by Guest

Subscribe to This Category Via RSS