Hotrodders.com




Hotrodders.com Project of the Week
To see our Project of the Week archives, click here.

Part 4: Starting on the Rear End
Everett Gross


This is what it looks like with the front clip welded in place.


1938 DeSoto Project
(Click photo to enlarge)


You could box in the frame to the front of the newer clip but I decided to weld in this plate to help it look a little more finished and cleaner.


1938 DeSoto Project
(Click photo to enlarge)


That's as far as I got before winter sets in. Here it sits all lonely in the snow waiting for spring. Got it in September 2001 -- it's now February 2003.


1938 DeSoto Project
(Click photo to enlarge)


IT'S SPRING! And I can't wait to get started, so let's begin. Next, I decide to clean up the rear end and rust encapsulate it. Then I paint it chassis black. I'm using products from Eastwood for this part of the project.


1938 DeSoto Project
(Click photo to enlarge)


Time to take out the old rear end and get ready to install the newer one.


1938 DeSoto Project 1938 DeSoto Project
(Click photos to enlarge)



Click here for Part 5: Chassis Prep and Brake Install


Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9


Record your hotrodding project in our Hotrodders Project Journals. Add photos and information as your project progresses. Easy to use, and completely free. Click here to check it out.
Hotrodders© 1999 - 2012 All Rights Reserved