Hotrodders.com Project of the Week
To see our Project of the Week archives, click here.

Part 2: Initial Frame Work
TurboS10

As you can see below, the first thing was to cut the rear frame section out of the way to make room for the new Competition Engineering frame rails and 4 link. The roll cage was one I got from Jegs. After several long weekends and A LOT of measuring I had the new frame and cage in place.






Click here for Part 3: Rearend and Brakes


Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11

Record your hotrodding project in our Hotrodders Project Journals. Add photos and information as your project progresses. Easy to use, and completely free. Click here to check it out.

---