Hotrodders.com Project of the Week
To see our Project of the Week archives, click here.
Part 4: Fitting the Bed
The next thing I had to do was try to figure out how to fit the bed to the new frame and cage. I wanted to make it removable for any major work that might have to be done so I made some removable panels that you can see below.
Click here for Part 5: Fitting the Engine
Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11
Record your hotrodding project in our Hotrodders Project Journals. Add photos and information as your project progresses. Easy to use, and completely free. Click here to check it out.
|Hotrodders© 1999 - 2012 All Rights Reserved|