Hotrodders.com Project of the Week
To see our Project of the Week archives, click here.

Part 11: Interior
TurboS10

The interior was the last part of the project. I made the dash and door panels out of .060 sheet aluminum and reinforced openings around the gauges and door handles with .125 sheet aluminum. The gauges are Auto Gauge since I am on a budget. The only exception is the $15 swap meet Auto Meter fuel pressure gauge that is peeking out from under the cowl. The carpet came from JC Whitney and the headliner from LMC Truck (thanks Weimer for the link). The trim pieces are junk yard parts refinished with charcoal colored vinyl paint.








Here's the completed truck.







Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11

Record your hotrodding project in our Hotrodders Project Journals. Add photos and information as your project progresses. Easy to use, and completely free. Click here to check it out.

---